{"title":"Equipment","description":"\u003cp\u003eCryo-EM lab equipment that streamlines sample preparation, from clipping stations and plunge coolers to temperature-controlled Vitrobot dewars, dewar drying racks and cryo-FIB systems.\u003c\/p\u003e","products":[{"product_id":"standard-gravitri-plunge-cooler","title":"Standard GraVitri Plunge Cooler","description":"\u003cp\u003eMiTeGen's Standard GraVitri Plunge Cooler is a reliable plunge cooler that  will dependably provide fast plunge speeds without risk of grid or tweezer damage, and a humidified environment that precludes excess sample drying. Building on the Basic Model, this design balances user friendliness, ergonomics function, and cost to deliver an affordable system with superior capabilities. See images for everything included.\u003c\/p\u003e\u003cp\u003eMiTeGen's GraVitri Plunge Cooler series provides consistent vitrification quality required for high-end structural techniques, proven by successful data collection across Single Particle Analysis (SPA), Cryogenic Electron Tomography (Cryo-ET) and Microcrystal Electron Diffraction (MicroED). Built on a Time-Tested Design developed in collaboration with the MRC LMB and Dr. Christopher Russo, this cooler has reliably enabled researchers worldwide to vitrify thousands of cryo-EM grids for high-resolution data collection.\u003c\/p\u003e\u003cp\u003eThe GraVitri Series features an advanced modular design, allowing your initial investment to easily grow and evolve with the changing scope of your cryo-EM research. By simply integrating new modules and accessories, you can precisely configure the system to meet specialized experimental needs without replacing the core unit. From custom enclosures for hands-on humidified sample prep to temperature-controlled enclosures, we can engineer solutions for your lab.\u003c\/p\u003e","brand":"MiTeGen","offers":[{"title":"Default Title","offer_id":49095468155131,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/files\/a7322e_aca6d5fa390349dfa3db52892dadbea4_mv2.jpg?v=1785154265"},{"product_id":"basic-gravitri-plunge-cooler","title":"Basic GraVitri Plunge Cooler","description":"\u003cp\u003eMiTeGen's Basic GraVitri Plunge Cooler is a reliable plunge cooler that  will dependably provide fast plunge speeds without risk of grid or tweezer damage, and is made with budget in mind. See images for everything included.\u003c\/p\u003e\u003cp\u003eMiTeGen's GraVitri Plunge Cooler series provides consistent vitrification quality required for high-end structural techniques, proven by successful data collection across Single Particle Analysis (SPA), Cryogenic Electron Tomography (Cryo-ET) and Microcrystal Electron Diffraction (MicroED). Built on a Time-Tested Design developed in collaboration with the MRC LMB and Dr. Christopher Russo, this cooler has reliably enabled researchers worldwide to vitrify thousands of cryo-EM grids for high-resolution data collection.\u003c\/p\u003e\u003cp\u003eThe GraVitri Series features an advanced modular design, allowing your initial investment to easily grow and evolve with the changing scope of your cryo-EM research. By simply integrating new modules and accessories, you can precisely configure the system to meet specialized experimental needs without replacing the core unit. From custom enclosures for hands-on humidified sample prep to temperature-controlled enclosures, we can engineer solutions for your lab.\u003c\/p\u003e","brand":"MiTeGen","offers":[{"title":"Default Title","offer_id":49095468482811,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/files\/a7322e_617deb33590a4b7f85adfed84a4e5d25_mv2.jpg?v=1785154266"},{"product_id":"gatan-698-elsa-cryoholder","title":"Gatan 698 Elsa Cryoholder","description":"\u003cp\u003eLike-new Elsa cryoholder, manufactured in 2021. Includes pumping station, temperature controller and transfer station. Newly inspected by Gatan and all preventative\/ongoing maintenance performed and certificate of good performance provided from Gatan. Ultra-low profile tip geometry for easy grid loading.\u003c\/p\u003e","brand":"Gatan","offers":[{"title":"Default Title","offer_id":49095470088443,"sku":"44011001","price":58000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/files\/Elsa.png?v=1789667627"},{"product_id":"ethane-temperature-controlled-vitrobot-dewar","title":"Ethane Temperature Controlled Vitrobot Dewar","description":"\u003cp\u003eDownload a PDF of our Quick Start Guide for the Ethane-Temperature Controlled Dewar \u003cu\u003e\u003ca href=\"http:\/\/www.nanosoftmaterials.com\/startguide-tempcontrolleddewar\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003eOur Ethane-Temperature Controlled Vitrobot Dewar enables control of the temperature of your liquid ethane for plunge freezing. Furthermore, the control box where the temperature is monitored and controlled also includes a tool warmer pad, with a warming plate and air flow to dry your cryo-tools quicker during vitrification.\u003c\/p\u003e\u003cp\u003eCryoEM practictioners have always relied on very rough control of the ethane temperature during vitrification. Usually, people wait until there is a bit of ethane ice on the wall of the brass cup, or until the ethane looks milky, to plunge their sample. Though not very repeatable, it often does the job, and the thought was always that colder ethane was better.\u003c\/p\u003e\u003cp\u003eMore recently findings suggest that colder ethane is not always better. Furthermore, with the lack of consistency in cryoEM sample preparation, more control over protocol variables can only help. Our Ethane-Temperature Controlled Dewar has sensors and heaters built into the brass ethane cup such that the temperature of the ethane can be controlled accurately and precisely, providing reliability and consistency in one more variable in your cryoEM sample preparation process. Finally you can accurately control your ethane temperature, especially away from the melting point of the ethane, where you cannot physically tell the temperature of the ethane (with frost or \"milkiness\").\u003c\/p\u003e\u003cp\u003eThe benefits of our system include:\u003c\/p\u003e\u003cul\u003e\t\u003cli\u003eAccurate control of the ethane temperature through embedded heaters and sensors\u003c\/li\u003e\t\u003cli\u003eA \"Snowflake Setting\"that will reliably keep the ethane temperature such that there is just a crust of frozen ethane on the cup\u003c\/li\u003e\t\u003cli\u003eHigh quality, robust foam dewar and cryogenically-compatible plastic basin\u003c\/li\u003e\t\u003cli\u003eRobust construction, whereby the brass cup, plastic basin and foam dewar can be disassembled without any tools for drying\u003c\/li\u003e\t\u003cli\u003eThe control provides a bake out cycle to quickly warm up the ethane cup and accelerate drying of the entire dewar assembly\u003c\/li\u003e\t\u003cli\u003eA  high quality, OLED screen with knob for easy system operation\u003c\/li\u003e\t\u003cli\u003eTool warmer built into the control box for convenient warming and drying of your tools.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NanoSoft","offers":[{"title":"Default Title","offer_id":49095490470139,"sku":"26021004","price":7500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/files\/nanosoft-26021004-1.jpg?v=1786545758"},{"product_id":"aquilos-hydra-extended-operation-system","title":"Aquilos\/Hydra Extended Operation System","description":"\u003cp\u003eOur Aquilos\/Hydra Extended Operation System enables longer continous, clog-free operation of the cryoFIB systems. The Aquilos\/Hydra can only run for ~16 hours on one fill of the dewar that comes with the instrument for the heat exchanger, resulting in the need to remove the heat exchanger to add LN2, which can be detrimental to your sample. This can be too close for comfort even for one overnight run.\u003c\/p\u003e\u003cp\u003eAquilos\/Hydra cryoFIBs with our system typically run for ~110 hours continuously with one fill of the larger, included 175L LN2 dewar. Furthermore, a fill port is included so that the dewar can be refilled with LN2 without needing to remove the heat exchanger. Regarding this option, our system includes a unique feature not offered by other competitor systems. The top of the dewar around the heat exchanger can get frosty\/icy, making it hard to open the top plate to add LN2. Our system has an anti-icing feature to keep excessive ice from forming, making refilling of the dewar easy and quick!\u003c\/p\u003e\u003cp\u003eAdditionally, all of our design and materials are top quality. Historically there have been issues with clogging of the cooling lines after ~25-40 hours of cryoFIB operation, leading to your sample warming up and being destroyed. Our tubing for the N2 gas lines is optimal for anti-moisture contamination, eradicating this clogging effect. Every component of our system is designed and engineered with premium materials and features, including top quality plastics and our foam, which doesn't chip or degrade over time like styrofoam.\u003c\/p\u003e\u003cp\u003eOur system includes:\u003c\/p\u003e\u003cul\u003e\t\u003cli\u003eA 175L LN2 dewar to replace the default Aquilos\/Hydra dewar for the heat exchanger\u003c\/li\u003e\t\u003cli\u003eAll parts and modifications to the structure of the heat exchanger, such that it is able to utilize the the larger volume of LN2 in the larger dewar (extendsions to mechanical structure and N2 gas lines)\u003c\/li\u003e\t\u003cli\u003eAn adaptor plate to hold the heat exchanger body in place at the larger neck of the 175L LN2 dewar\u003c\/li\u003e\t\u003cli\u003eModifications and design to ensure optimal operation of the heat exchanger and the dewar \u003c\/li\u003e\t\u003cli\u003eA fill port to enable refilling of the LN2 without removing the heat exchanger\u003c\/li\u003e\t\u003cli\u003eAnti-icing sub-system to keep the top of the dewar\/heat exchanger plate from collecting ice\/snow, making it easy to access the fill port and add more LN2\u003c\/li\u003e\t\u003cli\u003eAdditions and modifications to ensure clog-free operation of the system\u003c\/li\u003e\t\u003cli\u003eModifications to the stand for the heat exchanger, to hold the extended exchanger comfortably\u003c\/li\u003e\t\u003cli\u003eFull installation of the system on site by NanoSoft engineers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NanoSoft","offers":[{"title":"Default Title","offer_id":49095490568443,"sku":"32011001","price":20000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/files\/a7322e_f1b0a0a96bf649bab426e41d32664268_mv2.jpg?v=1785154357"},{"product_id":"clipping-station","title":"Clipping Station with Clipping Tools","description":"\u003cp\u003eIncluded in this SKU: Station Foam Dewar, Clipping Hub, Station Lid and Plug, 1 Clipping Tool Puck Rack, Silicone anti-rotation Mat, plus your selected bundle of 8 or 16 clipping tools\u003c\/p\u003e\u003cp\u003eAlready own clipping tools? The \u003ca href=\"\/products\/clipping-station-without-clipping-tools\"\u003eClipping Station without Clipping Tools\u003c\/a\u003e is the same station without a tool bundle.\u003c\/p\u003e\u003cp\u003eOur Clipping Station provides unmatched ease of use and efficiency for the clipping of cryoEM grids for Thermo Fisher autoloader-based microscopes, with its design optimized for the clipping workflow. A high quality foam dewar integrates grid box storage puck access directly adjacent to the clipping space, increasing ease of use and reducing the potential for contamination transferring grid boxes from pucks in other stations. A new clipping design makes the workflow easier, and a well designed lid balances ease of use and protection. Furthermore, our Clipping Station is compatible with both NanoSoft and Thermo Fisher clipping tools.\u003c\/p\u003e\u003cp\u003eThe station is housed in a high quality, closed-cell polyethylene foam, i.e. the Spearlab foam. The foam is highly durable and cools down and warms up\/dries off quickly. The inside of the foam dewar is designed to match the intricacies of the workflow; there are 3 cutout positions in the foam, each of which holds a component firmly in place such that it doesn't slide around during use. One cutout holds the clipping hub, which is the part used for clipping. The other 2 are the appropriate size to hold storage pucks. This allows you to place a storage puck directly and securely in the station adjacent to the Hub, so that grid boxes can be accessed without needing to transfer them through the ambient environment from another dewar. Furthermore, the Station comes with a puck sized holder for clipping tools, such that up to 33 tools can be pre-loaded with c-clips and placed in the holder to be cooled down while being held reliably in place; the puck and tools are in a position that is easy to access and enables seamless clipping of up to 33 samples at one time with one puck-full of tools. A valuable option is also to use the MiTeGen cassette puck - this enables you to load a cassette at the same time and in the same station where grids are clipped.\u003c\/p\u003e\u003cp\u003eThe Hub used for clipping utilizes a novel mechanism for moving the guidance cylinder, used to center the clipping tool over the autogrid ring, into and out of position. Instead of the rotating brass cylinder, which is often difficult to turn and can bend tweezers, the seesaw like mechanism requires the user to push down on either side of the cantilever beam to move the guidance cylinder into the position for clipping or into the position where the autogrid ring is placed or where the clipped grid can be picked up. Once the system and clipping tools are cooled down, and a storage puck placed into its spot adjacent to the Hub, the grid box holding the grids to be clipped can be moved to a grid box pocket in the Hub for easy grid access for clipping, and replacement of the autogrid after clipping.  Furthermore, The Hub has 4 \"on-deck\" positions for clipping tools where they can quickly be accessed for rapid-fire clipping. The shallow hole where the autogrid ring is placed for clipping has a dark colored surface to provide better contrast and easier tracking for placement of the autogrid ring and picking up of the clipped grid with autogrid tweezers. Furthermore, grooves are machined into the Hub to enable inspection of the clipped grid to ensure that it is well clipped and to roll the notch of cryoET, FIBSEM rings into the right orientation.\u003c\/p\u003e\u003cp\u003eThe lid for the station provides a thoughtful balance between usability and efficient separation of the clipping space from the ambient environment. The optimally designed opening in the lid provides the ideal amount of space to access the cantilever, the grid box pockets in the Hub and the 4 \"on-deck\" clipping tools, all without needing to rotate the lid, and while providing protection from ambient humidity. Knobs on the lid enable easy turning to access and transfer other grid boxes or clipping tools to the Hub, and a Lid insert can cover the entire opening so that the clipping space can be closed off from the ambient environment completely during cool down and as needed. Furthermore, a silicone sheet is provided upon which the entire station can be placed to reduce station movement when rotating the lid.\u003c\/p\u003e","brand":"NanoSoft","offers":[{"title":"With 8 Clipping Tools \/ With 2 Tweezers for Clipping Tool Handling","offer_id":49095495254267,"sku":"25011001","price":4350.0,"currency_code":"USD","in_stock":true},{"title":"With 16 Clipping Tools \/ Without Tweezers","offer_id":49095495287035,"sku":"25011001","price":5950.0,"currency_code":"USD","in_stock":true},{"title":"With 8 Clipping Tools \/ With Long Grid Tweezer and 2 Clipping Tool Tweezer","offer_id":49095495319803,"sku":"25011001","price":4415.0,"currency_code":"USD","in_stock":true},{"title":"With 8 Clipping Tools \/ Without Tweezers","offer_id":49095495352571,"sku":"25011001","price":4250.0,"currency_code":"USD","in_stock":true},{"title":"With 16 Clipping Tools \/ With Longer Tweezer for Grid Handling","offer_id":49095495385339,"sku":"25011001","price":6025.0,"currency_code":"USD","in_stock":true},{"title":"With 16 Clipping Tools \/ With Long Grid Tweezer and 2 Clipping Tool Tweezer","offer_id":49095495418107,"sku":"25011001","price":6115.0,"currency_code":"USD","in_stock":true},{"title":"With 16 Clipping Tools \/ With 2 Tweezers for Clipping Tool Handling","offer_id":49095495450875,"sku":"25011001","price":6050.0,"currency_code":"USD","in_stock":true},{"title":"With 8 Clipping Tools \/ With Longer Tweezer for Grid Handling","offer_id":49095495483643,"sku":"25011001","price":4325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/files\/nanosoft-25011001-4.jpg?v=1785387081"},{"product_id":"active-drying-rack-4l-dewar","title":"Active Drying Rack, 4L Dewar","description":"\u003cp\u003eThe Dewar Rack provides a compact, convenient way to organize and reliably dry your 4L LN2 dewars. The active version automatically starts a drying cycle upon placing a dewar upon it and dries it out completely in 35 minutes.\u003c\/p\u003e\u003cp\u003eA 4L dewar is placed upside-down onto the active Dewar Rack, with the drying tube inserted into the dewar. The dewar is automatically sensed and a drying cycle commenced. Ambient air is pulled through a filter and heated before being blown into the dewar; a short cooling phase brings the dewar to room temperature. An LED indicates cycle status. Compatible with both MVE and IC Biomedical 4L dewars.\u003c\/p\u003e\u003cp\u003ePair it with the \u003ca href=\"\/products\/passive-drying-rack-4l-dewar\"\u003ePassive Drying Rack\u003c\/a\u003e to organize dewars after drying, keeping the active rack free for the next cycle.\u003c\/p\u003e","brand":"NanoSoft","offers":[{"title":"No Dewar","offer_id":49328414916859,"sku":"33021001","price":1225.0,"currency_code":"USD","in_stock":true},{"title":"With 4L Dewar - IC Biomedical","offer_id":49328414949627,"sku":"33011004","price":2125.0,"currency_code":"USD","in_stock":true},{"title":"With 4L Dewar - MVE","offer_id":49328414982395,"sku":"33011003","price":1975.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/files\/a7322e_868eaf3888344c3680fa4c35c084ec53_mv2_070d1e23-f3b6-4c6e-a960-e4f76deca4cf.jpg?v=1788963812"},{"product_id":"passive-drying-rack-4l-dewar","title":"Passive Drying Rack, 4L Dewar","description":"\u003cp\u003eThe Dewar Rack provides a compact, convenient way to organize your 4L LN2 dewars. The passive version provides a way to organize your 4L dewars after being dried on your active Dewar Rack, keeping the active version free for drying.\u003c\/p\u003e\u003cp\u003eCompatible with both MVE and IC Biomedical 4L dewars.\u003c\/p\u003e\u003cp\u003eFor automated drying, see the \u003ca href=\"\/products\/active-drying-rack-4l-dewar\"\u003eActive Drying Rack\u003c\/a\u003e, which senses a dewar as it is placed and dries it out completely in 35 minutes.\u003c\/p\u003e","brand":"NanoSoft","offers":[{"title":"No Dewar","offer_id":49328422682875,"sku":"33021002","price":275.0,"currency_code":"USD","in_stock":true},{"title":"With 4L Dewar - IC Biomedical","offer_id":49328422715643,"sku":"33011006","price":1175.0,"currency_code":"USD","in_stock":true},{"title":"With 4L Dewar - MVE","offer_id":49328422748411,"sku":"33011005","price":1025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/files\/Passive-Drying-Rack-4L-Dewar-1.jpg?v=1791901820"},{"product_id":"clipping-station-without-clipping-tools","title":"Clipping Station without Clipping Tools","description":"\u003cp\u003eIncluded in this SKU: Station Foam Dewar, Clipping Hub, Station Lid and Plug, 1 Clipping Tool Puck Rack, Silicone anti-rotation Mat\u003c\/p\u003e\u003cp\u003eThis configuration ships without clipping tools, for labs that already own NanoSoft or Thermo Fisher tools. If you would like tools included, see the \u003ca href=\"\/products\/clipping-station\"\u003eClipping Station with Clipping Tools\u003c\/a\u003e, available with 8 or 16 tools.\u003c\/p\u003e\u003cp\u003eOur Clipping Station provides unmatched ease of use and efficiency for the clipping of cryoEM grids for Thermo Fisher autoloader-based microscopes, with its design optimized for the clipping workflow. A high quality foam dewar integrates grid box storage puck access directly adjacent to the clipping space, increasing ease of use and reducing the potential for contamination transferring grid boxes from pucks in other stations. A new clipping design makes the workflow easier, and a well designed lid balances ease of use and protection. Furthermore, our Clipping Station is compatible with both NanoSoft and Thermo Fisher clipping tools.\u003c\/p\u003e\u003cp\u003eThe station is housed in a high quality, closed-cell polyethylene foam, i.e. the Spearlab foam. The foam is highly durable and cools down and warms up\/dries off quickly. The inside of the foam dewar is designed to match the intricacies of the workflow; there are 3 cutout positions in the foam, each of which holds a component firmly in place such that it doesn't slide around during use. One cutout holds the clipping hub, which is the part used for clipping. The other 2 are the appropriate size to hold storage pucks. This allows you to place a storage puck directly and securely in the station adjacent to the Hub, so that grid boxes can be accessed without needing to transfer them through the ambient environment from another dewar. Furthermore, the Station comes with a puck sized holder for clipping tools, such that up to 33 tools can be pre-loaded with c-clips and placed in the holder to be cooled down while being held reliably in place; the puck and tools are in a position that is easy to access and enables seamless clipping of up to 33 samples at one time with one puck-full of tools. A valuable option is also to use the MiTeGen cassette puck - this enables you to load a cassette at the same time and in the same station where grids are clipped.\u003c\/p\u003e\u003cp\u003eThe Hub used for clipping utilizes a novel mechanism for moving the guidance cylinder, used to center the clipping tool over the autogrid ring, into and out of position. Instead of the rotating brass cylinder, which is often difficult to turn and can bend tweezers, the seesaw like mechanism requires the user to push down on either side of the cantilever beam to move the guidance cylinder into the position for clipping or into the position where the autogrid ring is placed or where the clipped grid can be picked up. Once the system and clipping tools are cooled down, and a storage puck placed into its spot adjacent to the Hub, the grid box holding the grids to be clipped can be moved to a grid box pocket in the Hub for easy grid access for clipping, and replacement of the autogrid after clipping.  Furthermore, The Hub has 4 \"on-deck\" positions for clipping tools where they can quickly be accessed for rapid-fire clipping. The shallow hole where the autogrid ring is placed for clipping has a dark colored surface to provide better contrast and easier tracking for placement of the autogrid ring and picking up of the clipped grid with autogrid tweezers. Furthermore, grooves are machined into the Hub to enable inspection of the clipped grid to ensure that it is well clipped and to roll the notch of cryoET, FIBSEM rings into the right orientation.\u003c\/p\u003e\u003cp\u003eThe lid for the station provides a thoughtful balance between usability and efficient separation of the clipping space from the ambient environment. The optimally designed opening in the lid provides the ideal amount of space to access the cantilever, the grid box pockets in the Hub and the 4 \"on-deck\" clipping tools, all without needing to rotate the lid, and while providing protection from ambient humidity. Knobs on the lid enable easy turning to access and transfer other grid boxes or clipping tools to the Hub, and a Lid insert can cover the entire opening so that the clipping space can be closed off from the ambient environment completely during cool down and as needed. Furthermore, a silicone sheet is provided upon which the entire station can be placed to reduce station movement when rotating the lid.\u003c\/p\u003e","brand":"NanoSoft","offers":[{"title":"With 2 Tweezers for Clipping Tool Handling","offer_id":49285247467771,"sku":"25011001","price":2650.0,"currency_code":"USD","in_stock":true},{"title":"Without Tweezers","offer_id":49285248057595,"sku":"25011001","price":2550.0,"currency_code":"USD","in_stock":true},{"title":"With Long Grid Tweezer and 2 Clipping Tool Tweezer","offer_id":49285248090363,"sku":"25011001","price":2715.0,"currency_code":"USD","in_stock":true},{"title":"With Longer Tweezer for Grid Handling","offer_id":49285248123131,"sku":"25011001","price":2625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/files\/nanosoft-25011001-2_a35511db-9fe0-4df4-a44a-be83ae73e128.jpg?v=1788964516"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0813\/8250\/6747\/collections\/a7322e_f1b0a0a96bf649bab426e41d32664268_mv2.jpg?v=1785394206","url":"https:\/\/nanosoftcryo.com\/collections\/equipment.oembed","provider":"NanoSoft","version":"1.0","type":"link"}